If you are lifting exceedingly heavy items at your factory, or perhaps your warehouse, installing an overhead crane may be appropriate. These can be costly investments, but they can also help you save time, and moving and shifting different items. Also referred to as a bridge crane, they are located in industrial settings, typically made with two parallel rails. Upon these rails will be placed the single and double girders that will either be stationary or will move laterally throughout the facility. Here is a beginner’s guide to overhead crane(puente grua) so that you will know what to look for when you make your purchase.
What Overhead Cranes Do
Their primary focus is to lift items up into the air and subsequently reposition and move them. If you have seen them in a warehouse before, they are typically at a very high point in the facility. You have many to choose from including single and double girder overhead cranes. There are also EOT cranes which are aptly named because they are electrically powered. There are also many heavy duty cranes that are positioned overhead which can lift 10 tons, 20 tons, and even much more. This is in contrast to light duty overhead cranes(grua monopuente), and also garage, workshop, and shop overhead cranes. Regardless of their design or capacity, the main reason that you obtain one is to lift items that are extremely heavy.
The Most Popular Overhead Cranes
The most popular ones tend to be electric overhead traveling cranes, top running cranes, and what are called traveling bridge cranes. If you are limited in space, under hung bridge cranes would be your top choice. As you are assessing each one, consider the different components that these cranes will have. There is going to be a trolley frame, chain hoist, electric hoist, and additional lifting equipment. There will be an end truck, a trolley attached to the frame, and a console by which you can control the entire apparatus. These are the most popular ones, with components that are in demand, from companies worldwide.
How Do You Use Overhead Cranes?
In general, the material that you would like to lift is placed underneath the hoist. From the hoist, the load is connected to the crane. A mechanism for lifting, such as a handheld control box, or a console in a booth, will allow an operator to begin to move the item. All of this is done electrically, along with the help of hydraulic power, and you can maneuver these items with great dexterity. From lifting them slowly, to shifting them from side to side, all of this is in the full control of the operator check out the post right here: http://aicrane.com.mx/.
In this beginner’s guide for overhead cranes, you have learned how to identify them. The popularity of certain cranes, and how they tend to function, has also been presented. However, there is no substitute for actually working with one of these industrial machines. It will take no more than a few hours, in most cases, to learn how to use them. Once installed, it’s going to provide the much-needed assistance that your workers will require when moving heavier items from one location to the next.
Additional info: https://aicrane.com.mx/venta-de-gruas-viajeras/