Every year, The U.S. Europe, and Japan alone produce over six million tons of scrap. The massive quantity of waste tires produced is growing and will continue to do so as associated automotive industries grow. The disposal of these waste tires is now a major environmental problem. Pyrolyis plant can solve this problem well. Here to know pyrolysis plant cost.
Accumulation of waste tires results in environmental pollution. Most of the waste tires are just dumped into landfills where they pose various hazards including accidental fires and diseases. Disposal of waste tires in landfills is not an effective disposal option since the tires are not easily biodegradable; they are bulky and take up valuable landfill space.
Open dumping of waste tires can result in accidental fires that have high pollution emissions. In the EU countries, the percentage of tires dumped in landfills stood at 62 percent of all produced tires. In 2000, this figure stood at 35 percent and by 2006, the figure had dropped to 0 percent due to EU legislation. Beston Pyrolysis company will address detailed solution for recycling waste tires.
Rubber is not biodegradable and this poses challenges with its disposal. The only way to reduce the impact of waste rubber on the environment is through recycling or energy recovery. However, the process of recycling rubber is not as simple as softening it through heating and remolding it.
The Solution: Waste Tyre Pyrolysis Machine
What Is It?
It is a thermal decomposition of organic material at high temperatures in the absence of any halogen or oxygen. An irreversible process involves the simultaneous change of the physical and chemical composition. Beston provides continuous type which has different reactor. Here to see continuous type: https://bestonturkey.com/continuous-pyrolysis-plant/.
The method used for recycling tires is a technique that involves heating of shredded or whole tires in a reactor vessel with an oxygen free atmosphere as well as a heat source. In the reactor, the tires are softened and the rubber polymers break down into smaller molecules. The vapors produced are burned directly to generate power or condensed into an oil-like liquid used as fuel. Some of the molecules are too small for condensation and remain as gas that can be burned as fuel. Do you know the other waste recycling machine – pulp molding machines? It turns paper waste into trays.
If performed properly, waste tire pyrolysis is very clean and has almost no waste or emissions.
Pyrolysis of waste tires helps to separate the solids in the tier such as carbon black and steel from the volatile gaseous and liquid compounds that can be used as fuel. Even though pyrolysis of waste tires has been developed widely throughout the world, economic, legislative, and marketing obstacles exist to its adoption on a wider scale.
Waste Tyre Recycling Plant Project Report: The Working Process Of A Pyrolysis Plant
-Raw materials are put into the furnace and the feed inlet is sealed. The bottom of the reactor will start heating the waste slowly and once the temperature reaches 250 to 280 degrees, you get crude oil. There will be continuous production of oil steam until the temperature reaches 300 to 400 degrees.
-Oil steam will flow through the device for separating heavy and light components. The lighter components will enter the condenser and the residue is discharged automatically in succession.
-The liquefied part is condensed to rubber oil.
-The on-liquefied part is put into the heating supply system for burning.
This has been a comprehensive pyrolysis plant project report on https://BestonTurkey.com. Hopefully, you have learned something new and amazing that is good for the environment and your pockets as well.